Cultured marble and cultured granite are man-made molded products. They are a blend of polyester resin, natural stone filler, pigment and catalyst. Each is molded and hardened to a solid material in a variety of shapes that meet diverse design needs. This manufacturing process permits a range of uses almost impossible to achieve with quarried stone.
Generally, we have a two week lead time. However, under most circumstances vanity tops ship within 28 business days.

DO NOT use any abrasive; such as Comet, Ajax, etc., on the marble surface.

For Glossy Finish:

Clean surface with liquids only; such as Windex, 409, Mr. Clean, Gel Gloss, etc. To maintain the luster, you may put a coat of furniture paste wax or Pledge on the surface and buff with a soft cloth every few months.

For Matte Finish:

Clean same as glossy finish

To remove cigarette stains, light scratches, etc., use a “SCOTCH-BRITE” pad (#7447). Rub lightly in a circular motion, always in the same directions

We offer a limited lifetime warranty against manufacturer defects.
When rust or hard water deposits develop, use a buffing compound (available at any automotive store) and a soft rag to buff away the deposits.
Our products are available in most major home improvement stores throughout the U.S. For commercial projects, please contact us at (800) 226-6386.
Click place_order_worksheet.pdf to print worksheet, then complete and take to a store near you. To download this worksheet, you’ll need Adobe Acrobat Reader. If you do not have Adobe Acrobat Reader, click here to get it.
  • Check Cabinets to see if they are level. If not level, shim beneath cabinet. Open on Each End – Click here to watch a video tutorial!
  • When all is level, run a bead of adhesive at corners of cabinet frame.
  • Place Vanity on top of cabinet. Be sure the backsplash is tight against wall. Make sure the over-hang margin is the same on each end. Press firmly into place.
  • Caulk using latex caulk where marble and wall meet.
  • Clean excess caulk from walls and marble.
  • Open-To-Wall – Click here to watch a video tutorial!
  • When all is level, check wall corner to see if it is square.
  • Place top on vanity to check fit in corner. If it does not fit, sand or cut the amount needed to ensure a good, tight fit.
  • When cutting and/or cutting has been completed, run a bead of adhesive along corners of cabinet framing
  • Place vanity onto cabinet
  • Place splash on vanity against side wall
  • Glue side splash to wall
  • Use silicon caulk where there is a marble-to-marble joint; use latex caulk where there is a marble-to-wall joint
  • Clean excess caulk off of the walls and marble Wall-To-Wall – Click here to watch a video tutorial!
  • When the cabinet is level, check corners for squareness
  • Slide vanity into place to see that it fits properly; cut or sand for proper fit
  • When cutting/sanding is completed, run a bead of adhesive along corners of cabinet framing
  • Place vanity onto cabinet
  • Put side splashes in place to check proper fit; saw or sand as necessary
  • Glue side splash to wall
  • Use silicon caulk where there is a marble-to-marble joint; use latex caulk where there is a marble-to-wall joint
  • Clean excess caulk off of the walls and marble